Author Topic: Yamaha RD200DX brake pipe help please  (Read 108 times)

0 Members and 1 Guest are viewing this topic.

Offline Terryb

  • Club Member
  • Back Lane Scratcher
  • Posts: 80
  • Location: West Runton Cromer Norfolk
Yamaha RD200DX brake pipe help please
« on: September 13, 2021, 02:12:18 AM »
Hi guys already posted this message with no reply,so here goes again I am needing front brake pipe from reservoir to second pipe where can I get one or who will make me one up.

Regards tel

Offline mike-w

  • Club Member
  • Newcomer
  • Posts: 4
  • Location: South East Somerset
Re: Yamaha RD200DX brake pipe help please
« Reply #1 on: September 13, 2021, 11:19:04 AM »
I am also looking for one as the date on the rubber hose is 1976! (1977 model with calliper in front)
I've contacted HEL performance and they want me to send my old one as they don't have any data. I'm also looking at hydraulic pipe suppliers as I'd like to have a rubber hose as per original.
The early FS1e DX used the same calliper - there may be an answer on their forum.
Someone must have an answer.

Mike

Offline mike-w

  • Club Member
  • Newcomer
  • Posts: 4
  • Location: South East Somerset
Re: Yamaha RD200DX brake pipe help please
« Reply #2 on: September 13, 2021, 02:02:18 PM »
Just looked at Yambits FS1e DX 1976 and they list a brake line of 700mm at £34.99. Looks the same as 77 RD200DX. They also have an upper and lower hose as per 76 model at £29.99 each.

Hope this is helpful.

Mike

Offline Astute Greaser

  • Club Member
  • Port Hacker
  • Posts: 918
  • Age: 64
  • Location: Bristol
Re: Yamaha RD200DX brake pipe help please
« Reply #3 on: September 13, 2021, 06:57:58 PM »
Had this made up by Pirtech in Avonmouth.  :D.
The hose is encased in stainless braid with plastic overcoat for easy clean.
Not original but far superior.

Offline Terryb

  • Club Member
  • Back Lane Scratcher
  • Posts: 80
  • Location: West Runton Cromer Norfolk
Re: Yamaha RD200DX brake pipe help please
« Reply #4 on: September 14, 2021, 01:43:10 AM »
Hi cheers just found that hose on yambits for fs1edx it looks the same will have a measure when home off this miserable gas platform  ;D ;D ;D ;D