AIRCOOLEDRDCLUB FORUM

Tech Zone => Skill centre => Topic started by: Motty on January 22, 2021, 07:58:03 PM

Title: RD350 with a rear disc brake
Post by: Motty on January 22, 2021, 07:58:03 PM
Following on from a conversation 5ports RD350Track Bike Build, I have posted a couple of photos showing the disc conversion on my 1974 RD350

Edit
Added a photograph showing the rear wheel

(https://uploads.tapatalk-cdn.com/20210122/209688d669b536e91ae9e65dd9b11546.jpg)


(https://uploads.tapatalk-cdn.com/20210122/abba4736d949ff27ad2cae0b6cd48225.jpg)




Sent from my Moto E (4) Plus using Tapatalk
(https://uploads.tapatalk-cdn.com/20210124/dd2c5fe3b1699b1e5526cc7c2b80fc0f.jpg)
Title: Re: RD350 with a rear disc brake
Post by: Barnett on January 24, 2021, 01:28:42 PM
A tidy set up! Have you got a pic further away of the rear end showing the disc mounted as well?
Title: Re: RD350 with a rear disc brake
Post by: Motty on January 24, 2021, 02:28:57 PM
A tidy set up! Have you got a pic further away of the rear end showing the disc mounted as well?
Hang on a second, I've used the same photo twice
I will see if I can edit the original post

Sent from my Moto E (4) Plus using Tapatalk

Title: Re: RD350 with a rear disc brake
Post by: 714tomp on October 28, 2021, 02:39:40 PM
Looking to upgrade to a rear disk, what wheel , caliper , master did you use? Thx
Title: Re: RD350 with a rear disc brake
Post by: Motty on October 31, 2021, 02:39:24 PM
Originally it had an E swinging arm, caliper and cast wheel, I believe the master cylinder is from a D.
In the photographs above, it now has a C spoked/disc wheel

Sent from my Pixel 4a (5G) using Tapatalk