Author Topic: Hello  (Read 542 times)

0 Members and 1 Guest are viewing this topic.

Offline Awksey

  • Club Member
  • Newcomer
  • Posts: 1
  • Location: Chorley
Hello
« on: May 03, 2021, 03:18:03 PM »
Hi All,

Just like to introduce myself as a recent member to the club.

I live in Lancashire and have been biking since 16 I'm 63 now where did it go.

It all started for me with a Puch Maxi single speed before buying an early Yamaha SS50, the one with SS50 on the side panels. Moved up to an AS1 bought as a write off at 17 took my test then bought a YDS7 which was the actual production bike raced by Charlie Williams in the early seventies which I converted to a road bike but still kept it as close to the racer as possible some road bike. Seen a photograph of the bike with CW on it in Classic Racer.

After the YDS7 bought second hand one of the first H2's to come in the country the bike had flat bars for the UK.

Been married for 30 years and my wife and I have 16 bikes between us ranging from Honda Z125 (hers) to Kawasaki ZRX1200R (mine).

Decided I wanted an RD250 or 350 so found an RD250A on Ebay 4 weeks ago close to me which had been restored with low miles. I've started to go through it and have begun to find areas of the bike which need some detailed attention. So have begun the process which will probably sound familiar to most on the forum.

Looking forward to being active on the forum.

Chris


Offline GAZZATT2

  • Moderators
  • Port Hacker
  • *
  • Posts: 4688
  • Age: 59
Re: Hello
« Reply #1 on: May 03, 2021, 03:21:31 PM »
welcome to the forum
XSR900  350lc 400F 400f special 2nd 400F special
it did look good in a photo lance ?
Picture026" border="0

Offline Gr8uncleal

  • Club Member
  • Port Hacker
  • Posts: 2574
Re: Hello
« Reply #2 on: May 03, 2021, 03:29:15 PM »
welcome to the forum

+1

Photos please!  ;) :D
Yam RD200DX (Gr8auntiepat's)
Yam FZX700 Fazer
Yam RD400C slowly getting back to standard
Yam RD350B rough
Yam RT2 almost finished
Yam DT360A almost finished
Suzi GT550J just started
Suzi 1250 Bandit regular rider
Yam RD125(A?) in the kitchen being reassembled
Yam RD250E just started
Yam DT3 just in

Online [Arrow]

  • Club Member
  • Port Hacker
  • Posts: 2553
Re: Hello
« Reply #3 on: May 03, 2021, 03:35:44 PM »
Welcome in.

Sent from my SM-G973F using Tapatalk


Online Motty

  • Richard
  • Club Member
  • Port Hacker
  • Posts: 5084
  • Location: England
Re: Hello
« Reply #4 on: May 03, 2021, 08:29:31 PM »
Welcome to the RD Forum

Sent from my Pixel 4a (5G) using Tapatalk

“...inside every old person is a young person wondering what the f*@k happened.”
Terry Pratchett

Offline Ozhammer

  • Ozhammer
  • Club Member
  • Port Hacker
  • Posts: 1110
  • Age: 59
  • Location: Australia
Re: Hello
« Reply #5 on: May 08, 2021, 01:57:39 PM »
Welcome Chris, good to have another member in the fold, hope you have many hours of enjoyment from your RD
2 strokes are all I need!

'74 S3
'75 CB400-4
'78 RD250E
'78 RD400E
‘78 RD400E
'79 RD400F
'79 RD400G
‘80 XJ650H
‘81 DT175H
'81 GT250EX X7
'81 RD350LC
‘83 KE175D3
'86 RD350F2