Author Topic: Oil filler neck  (Read 541 times)

0 Members and 1 Guest are viewing this topic.

Offline 5port

  • Club Member
  • Port Hacker
  • Posts: 7044
Re: Oil filler neck
« Reply #15 on: July 10, 2018, 08:30:56 AM »
Ours and the Canadian F models are the Daytona style and although some parts are interchangeable, not everything is, so you will need to be a little bit careful when ordering stuff.

Yes. But if you look at your Oceania RD400F partsbook, can you check the Oil filler neck and cap?  I think they will be the same 360- part that has been on all RD250/350/400 for the filler neck and, the 1A0- cap that has been on all RD250/400 since the C model, before that, the cap was a 214- part on the 250/350 (which obviously will fit the 360- Neck).   Ta

5port



You are correct 5port, the Daytona style bikes do indeed use the 360 prefix parts. As they say, every day’s a school day!  ;D


Yes.  Thanks for that Oz!  :)

5port
5port

Offline twostrokelooney

  • Club Member
  • Port Hacker
  • Posts: 1148
  • Age: 58
  • Location: Shrewsbury, England
Re: Oil filler neck
« Reply #16 on: July 10, 2018, 10:16:51 PM »
That is what I said about the filler neck.. :-\
I bought one and it fits all...  ???
Never Mind The Four Stroke.
Club Member 170.
RD350 (1973)
RD250E
TZR250 2MA YPVS
Z1000J3

Offline 5port

  • Club Member
  • Port Hacker
  • Posts: 7044
Re: Oil filler neck
« Reply #17 on: July 11, 2018, 12:40:19 PM »
That is what I said about the filler neck.. :-\
I bought one and it fits all...  ???

You did Colin.  :) 

5port
5port