Author Topic: RD400F  (Read 4156 times)

Offline RD JOCK

  • Club Member
  • Port Hacker
  • Posts: 2407
  • Age: 53
  • Location: Ayrshire Scotland
Re: RD400F
« Reply #30 on: March 08, 2013, 07:05:54 PM »
superb resto Paul  ,  8)
club member 075
AYR SCOTLAND              

400F   
250B
05 ZRX 1200R
RD350LC

Offline allspeed400

  • Club Member
  • Back Lane Scratcher
  • Posts: 103
  • Age: 52
  • Location: wigan.
    • allspeed400
Re: RD400F
« Reply #31 on: March 08, 2013, 07:20:23 PM »
Great bike, Let's hear it on you tube.  :)

Offline timmyboy

  • Club Member
  • Newcomer
  • Posts: 44
  • Location: sheffield
Re: RD400F
« Reply #32 on: October 03, 2013, 05:36:01 PM »
i would also love to hear them spannies, on youtube !  ;)

Offline ?

  • Club Member
  • Port Hacker
  • Posts: 1579
  • Age: 52
  • Location: WEST MIDLANDS
  • IT'S ONLY ROCK N ROLL
Re: RD400F
« Reply #33 on: October 03, 2013, 06:15:21 PM »
well done mr Dawkie top job again
Formerly SHAZTEZ    COYS

Offline Paul Dawkins

  • Admin Group
  • Port Hacker
  • Posts: 17166
  • Age: 72
  • Location: Southampton
  • DVLA Dating Officer & Motorbike MOT tester
Re: RD400F
« Reply #34 on: October 04, 2013, 06:32:56 AM »
I will have to find the video camera and open a U tube account.
« Last Edit: October 04, 2013, 11:39:04 AM by Paul Dawkins »
We do not stop playing because we grow old;
we grow old because we stop playing.

Sunny Southampton, Hampshire

Offline timmyboy

  • Club Member
  • Newcomer
  • Posts: 44
  • Location: sheffield
Re: RD400F
« Reply #35 on: October 04, 2013, 08:45:05 AM »
I will have to find the video camera and pen a U tube account.
go on paul, sure others would love to hear it  :) :) :) :) :) :D

Offline Mark j

  • Club Member
  • Port Hacker
  • Posts: 531
  • Age: 51
  • Location: Chichester West Sussex
Re: RD400F
« Reply #36 on: October 05, 2013, 03:32:44 PM »
What jetting are you running with that set up Paul ?, went out on my 400 with the Allspeeds last weekend it was running like a dog had to keep on changing down to keep up with my mate as it will only pull in the powerband range.
__________________
My wife says I never listen, or something like that!

Offline Paul Dawkins

  • Admin Group
  • Port Hacker
  • Posts: 17166
  • Age: 72
  • Location: Southampton
  • DVLA Dating Officer & Motorbike MOT tester
Re: RD400F
« Reply #37 on: October 05, 2013, 04:01:34 PM »
Its on 150 at the moment but it is not set up yet.
I have never ridden it but I will MOT and tax it in April and use it for summer 2014, I am building a RD400C at the moment.
We do not stop playing because we grow old;
we grow old because we stop playing.

Sunny Southampton, Hampshire

Offline Mark j

  • Club Member
  • Port Hacker
  • Posts: 531
  • Age: 51
  • Location: Chichester West Sussex
Re: RD400F
« Reply #38 on: October 05, 2013, 05:32:49 PM »
Its on 150 at the moment but it is not set up yet.
I have never ridden it but I will MOT and tax it in April and use it for summer 2014, I am building a RD400C at the moment.


Let me know if you need any bolts for it I have a stock of NOS chrome ones with the numbers on and the dome ones for the handlebar clamps.
__________________
My wife says I never listen, or something like that!

Offline Paul Dawkins

  • Admin Group
  • Port Hacker
  • Posts: 17166
  • Age: 72
  • Location: Southampton
  • DVLA Dating Officer & Motorbike MOT tester
Re: RD400F
« Reply #39 on: October 05, 2013, 06:54:20 PM »
I do mate
Handlebars one defo so yes please.
We do not stop playing because we grow old;
we grow old because we stop playing.

Sunny Southampton, Hampshire

Offline Mark j

  • Club Member
  • Port Hacker
  • Posts: 531
  • Age: 51
  • Location: Chichester West Sussex
Re: RD400F
« Reply #40 on: October 05, 2013, 08:39:38 PM »
No problem, if you fancy a run out I am only 20 mins away or we could meet?
__________________
My wife says I never listen, or something like that!

Offline Paul Dawkins

  • Admin Group
  • Port Hacker
  • Posts: 17166
  • Age: 72
  • Location: Southampton
  • DVLA Dating Officer & Motorbike MOT tester
Re: RD400F
« Reply #41 on: October 06, 2013, 04:06:50 PM »
If the weather is good next Sunday KeithRDC and me were thinking of the Meon valley for a spin and a bit of brecky
We do not stop playing because we grow old;
we grow old because we stop playing.

Sunny Southampton, Hampshire

Offline Mark j

  • Club Member
  • Port Hacker
  • Posts: 531
  • Age: 51
  • Location: Chichester West Sussex
Re: RD400F
« Reply #42 on: October 06, 2013, 04:50:56 PM »
If the weather is good next Sunday KeithRDC and me were thinking of the Meon valley for a spin and a bit of brecky


Sorry no can do, off to Goodwood Races that day, not off until 11 ish so if you want to swing by and grab the bolts in the morning.
« Last Edit: October 06, 2013, 04:52:33 PM by Mark j »
__________________
My wife says I never listen, or something like that!

Offline Paul Dawkins

  • Admin Group
  • Port Hacker
  • Posts: 17166
  • Age: 72
  • Location: Southampton
  • DVLA Dating Officer & Motorbike MOT tester
Re: RD400F
« Reply #43 on: November 29, 2013, 04:01:23 PM »
I never did get the finished photos of the bike with the seat on here.
Today I did a few finishing touches and here it is completely done.
Ready to ride in the 2014 season







We do not stop playing because we grow old;
we grow old because we stop playing.

Sunny Southampton, Hampshire

Offline timmyboy

  • Club Member
  • Newcomer
  • Posts: 44
  • Location: sheffield
Re: RD400F
« Reply #44 on: November 29, 2013, 04:23:30 PM »
superb bike that  :) them pipes are cool, cant wait for mine to come. had a message from martin the other day saying my pipes should be done in couple weeks  :D how did you go on with the jetting ? im only asking as unsure if my bike will need jetting or wot ?