Author Topic: rd400f wiring loom  (Read 697 times)

Offline loctite

  • Club Member
  • Back Lane Scratcher
  • Posts: 65
  • Age: 45
  • Location: newark,notts
rd400f wiring loom
« on: October 09, 2012, 11:29:48 PM »
hi everyone does anyone do a new wiring loom for the 400e/f mine may be salvageable but prefer new if obtainable cheers nigel,also looking for 250f downpipes....... :(

Offline Monkey

  • Monkey
  • Club Member
  • Port Hacker
  • Posts: 675
  • Age: 48
  • Location: Stamford, Lincs.
Re: rd400f wiring loom
« Reply #1 on: October 10, 2012, 08:39:34 AM »
Hi,

Ed Franklyn has made me a couple of wiring looms for my 250E's which have been great and he is very helpful.

I'm not sure if he advertises in the Member services but if you can track him down, definitely worth a PM.

Alan
Member No 163
250E lives!
430 Project nowhere near
250D work in progress

Offline Tone

  • Club Member
  • Port Hacker
  • Posts: 1053
  • Age: 56
  • Location: North Herts
Re: rd400f wiring loom
« Reply #2 on: October 10, 2012, 07:56:09 PM »
What about Norbo on this forum?? Downpipes are pretty rare to come by and when they do they can be fairly expensive for average condition ones. I suppose this in part is why people go for expansions etc.
« Last Edit: October 10, 2012, 07:58:31 PM by Tone »
RD 250 E. 1st Ride out completed!!!!!!!!!!!!!!! K82 Fitted, nice and sticky!!

Offline 3ma

  • 3ma
  • Port Hacker
  • Posts: 1556
  • Age: 51
  • Location: derby
Re: rd400f wiring loom
« Reply #3 on: October 10, 2012, 09:31:57 PM »
look at the last page of the for sale section ( loom ) kaptinkaos had / has one for sale .
YAMAHA RD400C X 3 , RD430F , RD250D , RD200E , TZ250W , TZR250 3MA , YL1 TWINJET , HARRIS MAGNUM 2 , FZR600R , LS2 .

BEST RD200 RD12 / 13
BEST RD400 RD12 BEST AT SHOW RD400 RD 13

Offline tony booth

  • Club Member
  • Port Hacker
  • Posts: 1248
  • Location: wolves
Re: rd400f wiring loom
« Reply #4 on: October 10, 2012, 11:13:32 PM »
Hi,

Ed Franklyn has made me a couple of wiring looms for my 250E's which have been great and he is very helpful.

I'm not sure if he advertises in the Member services but if you can track him down, definitely worth a PM.

Alan

Ed did me a 400c loom. Top job and a nice fella too.

Tony
It's better now, than it was before, when it was worse than what it is now.

Offline Monkey

  • Monkey
  • Club Member
  • Port Hacker
  • Posts: 675
  • Age: 48
  • Location: Stamford, Lincs.
Re: rd400f wiring loom
« Reply #5 on: October 11, 2012, 07:48:29 AM »
I just checked the member services - Ed Franklyn's in there towards the end.

I think he has changed his user name to "Mr Wiring Wizard"
Member No 163
250E lives!
430 Project nowhere near
250D work in progress

Offline mervin

  • Admin Group
  • Port Hacker
  • Posts: 12355
  • Age: 2010
  • Location: the dark sideof Dartmoor
  • buy the ticket…take the ride
Re: rd400f wiring loom
« Reply #6 on: October 11, 2012, 08:30:18 AM »
Yes he has changed his name to Mr wiring wizard, I saw him last saturday
 Merv
Classic  Japbikefest 2 http://www.vjmc.com/japbikefest/

Faster, Faster, until the thrill of speed overcomes the fear of death.”

Offline dinku

  • Club Member
  • Back Lane Scratcher
  • Posts: 277
  • Age: 37
  • Location: Wales
Re: rd400f wiring loom
« Reply #7 on: October 11, 2012, 04:19:10 PM »
Or you could try making them yourself  :) as I did  :)....successfully  8)

I drew my inspiration from  Ed, who did an article about making the looms in on of the WellARD magazines.
Honda Splendor1996
Yamaha RXG 2 Stroke sold 1997
Yamaha FZ 6N 2007 sold
Yamaha R1 2008 sold
Kawasaki ZZR1400 2009 sold
Triumph Rocket3 2009 sold
BMW R1200RT SE 2011
Triumph Street Triple 2010
Yamaha RD350A 1972

Offline loctite

  • Club Member
  • Back Lane Scratcher
  • Posts: 65
  • Age: 45
  • Location: newark,notts
Re: rd400f wiring loom
« Reply #8 on: October 11, 2012, 05:06:22 PM »
thanks guys just seen wiring looms for sale on ebay looks to be ok
http://www.ebay.co.uk/itm/Yamaha-RD250-RD400-Type-2R8-2R9-WIRE-LOOM-HARNESS-1978-79-RD-250-400-QH015-/310474633609?pt=UK_Motorcycle_Parts&hash=item4849baf189
i will buy one of these me thinks cheers nigel

Offline 5port

  • Club Member
  • Port Hacker
  • Posts: 3419
Re: rd400f wiring loom
« Reply #9 on: October 11, 2012, 05:27:15 PM »
Moisty has a pair of 250E/F downpipes on his ebay......
5port

Offline loctite

  • Club Member
  • Back Lane Scratcher
  • Posts: 65
  • Age: 45
  • Location: newark,notts
Re: rd400f wiring loom
« Reply #10 on: October 11, 2012, 05:39:47 PM »
Moisty has a pair of 250E/F downpipes on his ebay......

thanks just won them

Offline loctite

  • Club Member
  • Back Lane Scratcher
  • Posts: 65
  • Age: 45
  • Location: newark,notts
Re: rd400f wiring loom
« Reply #11 on: October 11, 2012, 05:41:16 PM »
just an headlight now lol