Author Topic: Electronic ignition  (Read 14114 times)

0 Members and 1 Guest are viewing this topic.

Offline [oldtimerhungary]

  • Newcomer
  • Posts: 2
Electronic ignition
« Reply #45 on: March 13, 2012, 02:07:09 AM »
Ok. Thank you. I tested the engine.



http://gallery.site.hu/u/oldtimerhungary_com/brezova/

Offline Johncb500

  • Club Member
  • Back Lane Scratcher
  • Posts: 216
  • Location: Hereford
Re: Electronic ignition
« Reply #46 on: June 16, 2017, 09:00:39 PM »
Quote from: Derbi 49cc
    I read many of the post and question why such a fuss with ignition points?  Unless originality is a must...



   I discarded the points on all of my internal combustion collection.  Parts for pointless ignition can be free for the taking or inexpensive from eBay.

   Ignition for a two stroke is a straight forward tasks and pointless, once completed, very reliable.  The pic is my RD200 retro.  The pick-up and reluctor came from a Geo-Metro (Toyota?) distributor given to me from a mechanic who scraps them when the bushing wear.  I ground off two of the bumps and used the original Yamaha points base to secure the pick-up. I also used the original keyed point lobe to secure the reluctor.  Some welding was required for the bracket and reluctor.

   The ignition control was from a Yamaha SRX250 (sorry no pic, it"s beneath the fuel tank) and the ignition coil was a two lead from a Yamaha four cyl.  I forgot which model though probably a FZR6 with different plug caps.  For simplicity I used the wasted spark format.  Never mind the generator that is for another time. 

  If enough interest is shown <font size="4"><strong>I can go into more detail for the club.</strong> </font> Don




Quote from: Highsider
Hey guys. Can you put together a list of parts needed for those of us that want electronic ignition on our rd200"s. I"m one of them.



Thanks




And me, never mind these idiots asking about there 250"s / 350"s for which elecy ignition IS available, lets have a step by step for the 200"s please as there is nowt commercially available <img src="smileys/smiley1.gif" border="0" align="middle" />


  OK all,how did this finish ??

 any thing to fit an RD125 ?
 no advance /retard issues ,fixed timing,just need list of parts and wiring diagram

  PLEASE
lifelong rider,laterly with Honda,now a little RD as well

  1355