Author Topic: Project x re-jetted after 350 conversion  (Read 3141 times)

0 Members and 1 Guest are viewing this topic.

Offline stuzx4r

  • Club Member
  • Newcomer
  • Posts: 23
  • Age: 52
  • Location: Cheshire
Project x re-jetted after 350 conversion
« on: September 24, 2015, 04:06:46 PM »
Hello all, when project X was converted to 350 where the carbs up-jetted? if so does anybody know to what size, also was the snorkel in the air box modified to allow greater flow?
I have just fitted 350 barrels onto my 250F and have jetted to 130 as a starting point - but I would be interested in a comparison from project X

Cheers.

Offline Paul Dawkins

  • Moderators
  • Port Hacker
  • *
  • Posts: 29136
  • Age: 76
  • Location: Southampton
Re: Project x re-jetted after 350 conversion
« Reply #1 on: September 24, 2015, 05:02:44 PM »
130 jet and snorkel removed and air screw out one and three quarters. It ran like shite with the snorkel in place. It is still slightly rich but that's better then the other way.
The last time it was used we had a problem starting it from cold so the carbs need to be removed over the winter.
« Last Edit: September 24, 2015, 05:05:05 PM by Paul Dawkins »
Southampton

Offline stuzx4r

  • Club Member
  • Newcomer
  • Posts: 23
  • Age: 52
  • Location: Cheshire
Re: Project x re-jetted after 350 conversion
« Reply #2 on: September 24, 2015, 05:23:53 PM »
Thanks for the quick reply, mine also looks a little rich but I haven't removed the snorkel yet, will pull it out this weekend and see how it effects things.
Fingers crossed.


Offline mervin

  • Moderators
  • Port Hacker
  • *
  • Posts: 15415
  • Age: 2014
  • Location: Hammerfest
  • buy the ticket…take the ride
Re: Project x re-jetted after 350 conversion
« Reply #3 on: September 24, 2015, 05:31:15 PM »
Paul
 if the carbs need an utrasonic blast send em top me mate   
Guy Martin: Football is 2 hours wasted watching 22 millionaires chasing a bag of wind in their underwear

I love deadlines. I love the whooshing noise they make as they go by.”
Douglas Adams

Ban grated cheese , make Britain grate again !!!!

Offline Paul Dawkins

  • Moderators
  • Port Hacker
  • *
  • Posts: 29136
  • Age: 76
  • Location: Southampton
Re: Project x re-jetted after 350 conversion
« Reply #4 on: September 24, 2015, 05:57:20 PM »
Paul
 if the carbs need an utrasonic blast send em top me mate   


OK mate thanks, but the bike is wrapped up at the moment ready for my house move.
I will do it ready for next season along with the twin disk conversion if I get my new workshop ready in time.
« Last Edit: September 24, 2015, 06:06:04 PM by Paul Dawkins »
Southampton

Offline mervin

  • Moderators
  • Port Hacker
  • *
  • Posts: 15415
  • Age: 2014
  • Location: Hammerfest
  • buy the ticket…take the ride
Re: Project x re-jetted after 350 conversion
« Reply #5 on: September 24, 2015, 07:56:32 PM »
no worries mate whenever 
Guy Martin: Football is 2 hours wasted watching 22 millionaires chasing a bag of wind in their underwear

I love deadlines. I love the whooshing noise they make as they go by.”
Douglas Adams

Ban grated cheese , make Britain grate again !!!!

Offline stuzx4r

  • Club Member
  • Newcomer
  • Posts: 23
  • Age: 52
  • Location: Cheshire
Re: Project x re-jetted after 350 conversion
« Reply #6 on: October 12, 2015, 06:03:02 PM »
The larger air pipe from the 400 has now been fitted in-between the 2 halves of the airbox and the rear snorkel refitted. All feels well and seems to be running really well, obviously I'm still running in, so I'll know more when I can rev it a little further. Will keep you all updated.

Offline stuzx4r

  • Club Member
  • Newcomer
  • Posts: 23
  • Age: 52
  • Location: Cheshire
Re: Project x re-jetted after 350 conversion
« Reply #7 on: June 19, 2016, 05:31:25 PM »
All run-in now, what a big improvement over the 250 barrels  :) :) :)

Its still slightly rich so I may try dropping one size, maybe time for a trip to the dyno to check the fuelling and to see how much power it now has.

Offline 5port

  • Club Member
  • Port Hacker
  • Posts: 6812
Re: Project x re-jetted after 350 conversion
« Reply #8 on: June 22, 2016, 08:07:37 PM »
All run-in now, what a big improvement over the 250 barrels  :) :) :)

Its still slightly rich so I may try dropping one size, maybe time for a trip to the dyno to check the fuelling and to see how much power it now has.

 :)
5port