Author Topic: Zeeltronics  (Read 4644 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul Dawkins

  • Moderators
  • Port Hacker
  • *
  • Posts: 29139
  • Age: 76
  • Location: Southampton
Zeeltronics
« on: August 22, 2011, 10:12:33 AM »
The Zeeltronics PCDI-10 was donated to Project X directly from Zeeltronics



Gazzatt2 fitted it as per the instructions and the unit was pre-set for the RD250E

The bike runs very smooth with it fitted and we have not had to fiddle with it at all.

Today I pluged the Remote computer in to unit under the seat and had a little play.



I have set the rev limiter down to 8000 revs but I dont see the need to play with this system any further.



The bike runs fine on the pre-set power curve one.



There loads of power curvs if you are a fiddler and loads of setting you can play with but as we are not racing this bike i think mits just left as is for reliability.



If I had a RD E version I would definatly fit one of these to mine.



I would like to thank Zeeltronics for this wonderful piece of kit donated to Project X







« Last Edit: November 05, 2012, 08:55:04 PM by Paul Dawkins »
Southampton

Offline mervin

  • Moderators
  • Port Hacker
  • *
  • Posts: 15420
  • Age: 2014
  • Location: Hammerfest
  • buy the ticket…take the ride
Zeeltronics
« Reply #1 on: August 22, 2011, 11:07:15 AM »
I just got one for my TDR and it controls the powervalves as well but i am having a bit of fun getting it right somehow, it is the same controller as that one and 350 YPVS, with powervalve controller added

no doubt i will get there in the end
Guy Martin: Football is 2 hours wasted watching 22 millionaires chasing a bag of wind in their underwear

I love deadlines. I love the whooshing noise they make as they go by.”
Douglas Adams

Ban grated cheese , make Britain grate again !!!!

Offline mervin

  • Moderators
  • Port Hacker
  • *
  • Posts: 15420
  • Age: 2014
  • Location: Hammerfest
  • buy the ticket…take the ride
Zeeltronics
« Reply #2 on: August 22, 2011, 12:26:36 PM »
TDR Sorted just needed the static timing setting first before the curves work correctly
Guy Martin: Football is 2 hours wasted watching 22 millionaires chasing a bag of wind in their underwear

I love deadlines. I love the whooshing noise they make as they go by.”
Douglas Adams

Ban grated cheese , make Britain grate again !!!!

Offline Paul Dawkins

  • Moderators
  • Port Hacker
  • *
  • Posts: 29139
  • Age: 76
  • Location: Southampton
Re: Zeeltronics
« Reply #3 on: January 25, 2013, 04:55:08 PM »
I have just sent Zeeltronics a message asking for the map for the 350A/B for when Project X conversion is finished.

It should go well with the new barrels and the Zeeltronics set up correctly.
Southampton

Offline mervin

  • Moderators
  • Port Hacker
  • *
  • Posts: 15420
  • Age: 2014
  • Location: Hammerfest
  • buy the ticket…take the ride
Re: Zeeltronics
« Reply #4 on: January 25, 2013, 05:28:57 PM »
Paul
 with the limiter at 8000 what does it do because i set the limite ron the red line of the TDR and it was flat as a cows collar, put it 200 over and it was a different bike, the limiter seemed to kill it well before the limit was reached
Guy Martin: Football is 2 hours wasted watching 22 millionaires chasing a bag of wind in their underwear

I love deadlines. I love the whooshing noise they make as they go by.”
Douglas Adams

Ban grated cheese , make Britain grate again !!!!

Offline Paul Dawkins

  • Moderators
  • Port Hacker
  • *
  • Posts: 29139
  • Age: 76
  • Location: Southampton
Re: Zeeltronics
« Reply #5 on: January 25, 2013, 06:02:16 PM »
Merv
I have never ridden the bike with the rev limiter set but those that have said it ws as flat as a Honda.

I going to see what Borut says and set it at that with no limiter set.

I just hope it is run in properly before someone thrashes it.

Southampton

Offline mervin

  • Moderators
  • Port Hacker
  • *
  • Posts: 15420
  • Age: 2014
  • Location: Hammerfest
  • buy the ticket…take the ride
Re: Zeeltronics
« Reply #6 on: January 25, 2013, 07:03:31 PM »
Maybe run it with the limiter on to run in , but really that is not running in, best way is to just let it rev free , but not to fast , and open it up every 10 miles to blow the weeds out is my view, others will differ
Guy Martin: Football is 2 hours wasted watching 22 millionaires chasing a bag of wind in their underwear

I love deadlines. I love the whooshing noise they make as they go by.”
Douglas Adams

Ban grated cheese , make Britain grate again !!!!